Optimise your engine for maximum power

This technology has become so advanced in recent years, it is now possible to remap your Audi/VW/Seat/Skoda directly though the vehicles standard diagnostic port. Using this diagnostic port we can access the engines software memory chip and reprogram it with tuned software optimized for the maximum power that the engine will safely handle. We also eradicate any original design flaws such as flat spots and hesitations, the fuelling is also optimized in some cases up to 12% better consumption.

Not all cars can be remapped in this way as not all cars are new enough to have the technology on board to facilitate diagnostic port remapping. Cars to old for remapping have to be chip tuned. Most Audi/VW/Seat/Skoda cars built later than 2000 can be ECU remapped via the diagnostic port.

ECU Remapping usually takes between 1 to 2 hours to complete, a full engine management fault diagnostic health check will be performed before and after tuning using main dealer equipment. Please note we may refuse to remap your car if its engine management system has certain faults present during the diagnostic heath check.

We will offer advice/repair of any engine management faults if present.

We cover most of the UK inc Ireland, concentrating on the North West, Midlands and Wales.

Custom tunings are available for the modification enthusiast.